FGM 100 - Proofing Unit

GENERAL SPESIFICATION

* It is manufactured from 18/8 Cr-Ni stainless steel

* For 6 ve 10 trays ovens.

* It is capable of taking in 5 trays with GN 2/1mm, 10 trays with GN 1/1mm or 5 trays with 400*600 cm at once.

* The space between the racks is 65 mm

* By automatic water filling button on the control panel, the pan on the base of the closet can be filled automatically.

* There is a humid and warm air blowing system through the catalytic fan in the closet.

• * You can adjust the working time of the heater with the switch no. 4. The desired timing can be adjusted in a renge between 0-60 min by turning the the timer button clockwise. By the end of the set time, the yellow signal lamp goes off. The device Works continously in case the timer button is turned counter-clockwise towards the “TIMER” label. The timer button should be turned to position “0” in order to shut down the device.

* Feets are manufactured from height-adjustable stainless tubes.

* There are stainless steel door handles on the doors

* For ovens acceptable FBE 006/010, FKE 006/010.

TECHNICAL SPESIFICATION