TMB S - MarbleTop Table / 4 Drawers / Lower Shelf
Standard Unit
Features
- Depth: 82 cm
- Height: 153,8 cm
- Gross weight: 113 kg
- Width: 75,2 cm
Standard Unit
- Depth: 82 cm
- Height: 153,8 cm
- Gross weight: 113 kg
- Width: 75,2 cm
General features |
|
| Depth | 82 cm |
| Height | 153,8 cm |
| Gross weight | 113 kg |
| Width | 75,2 cm |
Functional Features |
|
| Water Inlet Temperature | 3/4 inç |
| Water Pressure | 2-4 bar |
| Water Consumption | 3,3 Lt/saat |
| Washing Temperature | 55 °C |
| Rinse Temperature | 85 °C |
| Water Inlet Temperature | 40-50 °C |
| Tank Water Volume | 29 lt |
| Number of Programs | 3 pcs |
| Short Program | 60 sn |
| Intermediate Program | 120 sn |
| Long Program | 180 sn |
| Rinse Motor Power | 0,33 kW |
| Discharge Engine Power | 31 watt |
| Detergent Pump Power | 8 watt |
| Polisher Pump | 8 watt |
Technicial Specifications |
|
| Electric Input | 380/400 Volt |
| Washing Motor Power | 0,6 kW |
| Max. Electric power | 8,7 kW |
| Frequency | 50 Hz |
| Tank Power | 2,7 kW |
| Boiler Power | 8 kW |
| Cable cross section | 5x4 mm² |
| Boiler Volume | 6 lt |
Accessory |
|
| Plate Capacity | 1080 pcs/h |
| Cassette Capacity | 60 pcs/h |
| Cup Capacity | 2160 pcs/h |
| Tray Capacity | 540 pcs/h |
| Plate Diameter Max. | 400 mm |
| Plate height | 380 mm |
Top is manufactured from marble material.
It is completely manufactured from AISI304 18/8 Cr-Ni stainless steel.
Stainless steel tube section has been used to manufacture feet and bearing construction.
Upper plate is manufactured from polyethylene material with a thickness of 30 mm, the sheets on the legs and the backsplash is from stainless steel; the legs with a thickness of 1,20 mm and the backsplash with 1,00 mm.
Top is flat and double-turn and has 60 mm of backsplash.
According to the sizes of the work table, stainless steel sheet is reinforced to the required sections.
Feet are manufactured from 40*40*1,2 mm stainless steel and there are adjustable joint balls on the tips.
There are 4 drawers which can be mounted to the right or left side of the bench.
Drawers have the dimensions of GN1/1 (or 500*500*150) and they are mounted on the body with polyethylene reels on the rail.
Drawer handles are manufactured from AISI304 stainless steel sheet.
Open surfaces around the drawers are covered with 0,8 mm sheet.
- Depth: 92 cm
- Height: 202 cm
- Width: 465 cm
- Depth: 92 cm
- Height: 202 cm
- Width: 430 cm
- Depth: 92 cm
- Height: 202 cm
- Width: 370 cm
