TMS S -Marble Top Table/Cupboard/Intermediate Shelf
Standard Unit
Features
- Depth: 78,9 cm
- Height: 147 cm
- Gross weight: 108 kg
- Width: 76 cm
Standard Unit
- Depth: 78,9 cm
- Height: 147 cm
- Gross weight: 108 kg
- Width: 76 cm
General features |
|
| Depth | 78,9 cm |
| Height | 147 cm |
| Gross weight | 108 kg |
| Width | 76 cm |
Functional Features |
|
| Water Inlet Temperature | 3/4 inç |
| Water Pressure | 2-4 bar |
| Water Consumption | 3,5 Lt/saat |
| Washing Temperature | 55 °C |
| Rinse Temperature | 85 °C |
| Water Inlet Temperature | 40-50 °C |
| Tank Water Volume | 29 lt |
| Number of Programs | 3 pcs |
| Short Program | 60 sn |
| Intermediate Program | 120 sn |
| Long Program | 180 sn |
| Rinse Motor Power | 0,33 kW |
| Discharge Engine Power | 31 watt |
| Detergent Pump Power | 8 watt |
| Polisher Pump | 8 watt |
Technicial Specifications |
|
| Electric Input | 380/400 Volt |
| Washing Motor Power | 0,6 kW |
| Max. Electric power | 11,3 kW |
| Frequency | 50 Hz |
| Tank Power | 2,7 kW |
| Boiler Power | 8 kW |
| Cable cross section | 5x2,5 mm² |
| Boiler Volume | 6 lt |
Accessory |
|
| Plate Capacity | 1008 pcs/h |
| Cassette Capacity | 72 pcs/h |
| Cup Capacity | 2592 |
| Tray Capacity | 540 |
| Plate Diameter Max. | 400 mm |
| Plate height | 380 mm |
Top is manufactured from marble material.
It is completely manufactured from AISI304 18/8 Cr-Ni stainless steel.
Stainless steel tube section has been used to manufacture feet and bearing construction.
Upper plate is manufactured from polyethylene material with a thickness of 30 mm, the sheets on the legs and the backsplash is from stainless steel; the legs with a thickness of 1,20 mm and the backsplash with 1,00 mm
Top is flat and double-turn and has 60 mm of backsplash.
According to the sizes of the work table, stainless steel sheet is reinforced to the required sections.
Feet are manufactured from 40*40*1,2 mm stainless steel and there are adjustable joint balls on the tips.
Double sliding doors have industrial nylon (N66) reels and they are double turn and single-hull; and parts, which require support, are reinforced from inside.
Sliding doors are mounted from the below to lower table.
Drawer and drawer handles are manufactured from AISI304 stainless steel sheet.
- Depth: 92 cm
- Height: 202 cm
- Width: 465 cm
- Depth: 92 cm
- Height: 202 cm
- Width: 430 cm
- Depth: 92 cm
- Height: 202 cm
- Width: 370 cm
